Features

• Support the latest High Speed / High Capacity Flash Memory Card Up to 32GB (SDHC 2.0 Compliance)
• Transfer rate of Hi-Speed USB 2.0 interface
• Internal design fitting into 3.5" drive bay to save the desktop space.
• Supports Hot-Swapping and Plug and Play function.
• USB Bus powered; no external power required.
• Supports Mass Storage Class Drive
• Support Win 98/2000/XP/Vista/Win 7, Mac OS V9.2 or higher
• Driverless

Features

• Support the latest High Speed / High Capacity Flash Memory Card Up to 32GB (SDHC 2.0 Compliance)
• Support SuperSpeed USB 3.0 X 1 port
• Transfer rate of Hi-Speed USB 2.0 interface
• Internal design fitting into 3.5" drive bay to save the desktop space.
• Supports Hot-Swapping and Plug and Play function.
• USB Bus powered; no external power required.
• Supports Mass Storage Class Drive
• Support Win 98/2000/XP/Vista/Win 7, Mac OS V9.2 or higher
• Driverless

Specifications

• Reader and Writer Support :

• Support the latest High Speed / High Capacity Flash Memory Card Up to 32GB (SDHC 2.0 Compliance)
• Compact Flash Card CF-I/CF-II/Extreme CF/Extreme III CF/Ultra II CF/HS CF/XS CF/CF Pro/CF Elite Pro/CF Pro II
• Memory Stick Card MS/MS PRO/MS MagicGate/MS MagicGate PRO/MS MagicGate DUO/MS MagicGate PRO DIO/Extreme MS PRO/Extreme III MS PRO/Ultra II MS PRO/HS MS MagicGate PRO/HS MS Pro/MS Select
• Secure Digital Card SD/Extreme SD/Extreme III SD/Ultra  II SD/SD Pro/SD Elite Pro/HS SD/Ultra Speed SD/SD-Ultra-X/HS Mini SD
• Multi Media Card MMC 1/MMC 2/MMC 4.0
• Smart Media Card SM/SM ROM/XD
• IBM MicroDrive/Hitachi MicroDrive/MagicStor
• TransFlash Memory

• Need Adaptor: MS Duo/MS Magic Gate Pro Duo/MS Magic Gate Duo/MS Pro Duo/RS MMC/HS MS Pro Duo/MS Rom/HS MS Magic Gate Pro Duo/HS RS MMC/DV-RS MMC/RS MMC 4.0/T-Flash/Mini SD

• Simply plug the USB cable to your motherboard, match the Red wire to your board manual +5V pin; or the black wire to the Ground pin
• ZE-C68 comes in a 10 pin USB connector like below picture; and you need one 10 pin onboard USB port on your motherboard; follow the above guideline to plug the 10 pin header to the onboard USB port (see Sample picture 1 & 2)
• ZE-C268 comes in two USB connectors; a 4 pin (onboard) USB connector and a Type A USB 3.0 connector; plug the 4 pin internal USB connector header to your onboard USB port by following above step  (see Sample picture 2) and route the Type A USB 3.0 connector out to the back of the I/O plate via the PCI bracket and plug it on the back USB 3.0 port like picture below
• Check your BIOS setting to see if you need to "Enable USB Device"

Sample picture 1

Sample picture2

• USB 3.0 cable connection (Only apply to ZE-C268)

  Most of the USB 3.0 connections are resided on the I/O plate at the back of the motherboard, so, the USB 3.0 cable(s) will need to be routed out of the PCI slot and connected to the back of the I/O input. The PCI bracket comes in with the package

  

  

 

(ZE-C68) Package Contents

• All-in-1 Card Reader
• USB cables (10 pins Internal)
• Black & Silver panels
• User Guide

(ZE-C268) Package Contents

• All-in-1 Card Reader
• USB Cables (external Type 2 cable x 1; Length: 1M or 40")
• PCI Cable Routing Bracket
• Screws

• User Guide