ZE-C128  & ZE-C138

#1 in the market to support High Capacity Card & HD Audio

Images: 1 , 2 , 3

Model#  ZE-C128

USB 2.0 Internal Card Reader w/ ports

Black Aluminum Panel

Model#  ZE-C138

USB 2.0 Internal Card Reader w/ ports

Silver Aluminum Panel


  • Support the latest High Speed / High Capacity Flash Memory Card Up to 32GB (SDHC 2.0 Compliance)
  • Support High Definition & AC97 Front Audio (onboard port required)
  • Support the latest flash card specification: CF 4.0 (DMA mode), SD1.1/2.0 (SDHC), MMC4.1/4.2, MSPro parallel mode (4-bit), xD 1.2
  • Support all e-SATA External Hard Drive
  • Internal design fitting into 5.25" drive bay to save the desktop space.
  • Supports Hot-Swapping and Plug and Play function.
  • Support slot-to-slot read/write operation
  • USB Bus powered; no external power required.
  • Support USB V2.0 specification and USB Device Class Definition for Mass Storage, Bulk-Transport
  • Support Win ME/2000/XP/Vista/Win 7/8, Mac OS X/ V9.2 or higher
  • Driverless
  • All internal cable with direct connection to motherboard onboard port


  • Front USB X 3 / IEEE 1394 / eSATA / HD (or AC97) Audio
  • Transfer rate of Hi-Speed USB 2.0 interface
  • Reader and Writer Support :
  • Support SM Card,T-Flash,MS Select.0,

  • xD,XD(M)Type,XD(H).

  • MS, MS Pro, MS Magic Gate, MS-Pro Magic Gate,HS-MS-Pro Magic Gate, MS-DUO,

    MS Pro-Duo, MS Pro-Duo PSP, MS Pro-Duo Gaming,

    HS-MS-Pro Duo,MS-DUO MagicGate, MS Pro-DUO MagicGate

  • Secure Digital Card,Mini SD, Extreme SD, Extreme III SD,Ultra II SD

  • CF I,CF II,Extreme CF,Extreme III CF,Ultra II CF,HS CF, Micro Drive……

  • Need Adaptor: MS Duo/MS Magic Gate Pro Duo/MS Magic Gate Duo/MS Pro Duo/RS MMC/HS MS Pro Duo/MS Rom/HS MS Magic Gate Pro Duo/HS RS MMC/DV-RS MMC/RS MMC 4.0/T-Flash/Mini SD
Installation Quick Guide
  • Check your BIOS setting to see if you need to "Enable USB Device"
  • Connect HD Audio or AC 97 Audio & SATA ports

If your motherboard supports onboard HD port, plug in the HD connector to your onboard port. If your motherboard has only AC97 chipset onboard port, plug in the AC97 connector. Please look at the pin label (on connector) and your board manual for accurate connection. Some relocations may be needed depend on motherboard manufactory layout.

  • Connect SATA cable to your onboard SATA port

  • Connect Card Reader & USB Ports

  • Match the pin label (on connector) and your board manual USB connection layout for accuracy

Major Reviews

Package Contents

  • All-in-1 Card Reader
  • SATA cable (Internal)
  • USB cables (Internal)
  • IEEE 1394 cable (Internal)
  • HD / AC 97 Audio cable (Internal)
  • Screws
  • User Guide

Go back  Top

About nMedia   Contact Us  Legal Disclaimer

Copyright ©  2005-2013 NMEDIA SYSTEM, INC. All Rights Reserved.