ZE-C118

#1 in the market to support High Capacity Card & the first to launch USB 3.0 port

Images: 1 , 2
FeatureSpecificationGallery

Model#  ZE-C118

USB 2.0 Internal Card Reader / USB 2.0 x1 & eSATA x 1

3.5" Internal Bay with Black Panel

Features

  • Support the latest High Speed / High Capacity Flash Memory Card Up to 32GB (SDHC 2.0 Compliance)
  • Support the latest flash card specification: CF 4.0 (DMA mode), SD1.1/2.0 (SDHC), MMC4.1/4.2, MSPro parallel mode (4-bit), xD 1.2
  • Support all e-SATA External Hard Drive
  • Extra USB 2.0 port
  • Internal design fitting into 3.5" drive bay to save the desktop space.
  • Supports Hot-Swapping and Plug and Play function.
  • Support slot-to-slot read/write operation
  • USB Bus powered; no external power required.
  • Support USB V2.0 specification and USB Device Class Definition for Mass Storage, Bulk-Transport
  • Support Win ME/2000/XP/Vista/Win 7/8, Mac OS X/ V9.2 or higher
  • Driverless
  • All internal cable with direct connection to motherboard onboard port

ZE-C118 port layout picture

Specifications

  • 4 Slots Card Reader
  • Front USB & eSATA (all must be connected to motherboard onboard ports)
  • Transfer rate of Hi-Speed USB 2.0 interface
  • Reader and Writer Support :
  • Support SM Card,T-Flash,MS Select.0,

  • xD,XD(M)Type,XD(H).

  • MS, MS Pro, MS Magic Gate, MS-Pro Magic Gate,HS-MS-Pro Magic Gate, MS-DUO,

    MS Pro-Duo, MS Pro-Duo PSP, MS Pro-Duo Gaming,

    HS-MS-Pro Duo,MS-DUO MagicGate, MS Pro-DUO MagicGate

  • Secure Digital Card,Mini SD, Extreme SD, Extreme III SD,Ultra II SD

  • CF I,CF II,Extreme CF,Extreme III CF,Ultra II CF,HS CF, Micro Drive……

  • Need Adaptor: MS Duo/MS Magic Gate Pro Duo/MS Magic Gate Duo/MS Pro Duo/RS MMC/HS MS Pro Duo/MS Rom/HS MS Magic Gate Pro Duo/HS RS MMC/DV-RS MMC/RS MMC 4.0/T-Flash/Mini SD
Installation Quick Guide
  • Simply plug the USB cable to your motherboard, match the Red wire to your board manual +5V pin; or the black wire to the Ground pin
  • Connect the SATA cable to your onboard SATA port (Sample picture 3)
  • ZE-C118 comes in a 10 pin USB connector like below picture; and you need one 10 pin onboard USB port on your motherboard; follow the above guideline to plug the 10 pin header to the onboard USB port (see Sample picture 1 & 2)
  • ZE-C218 comes in two USB connectors; a 4 pin (onboard) USB connector and a Type A USB 3.0 connector; plug the 4 pin internal USB connector header to your onboard USB port by following above step  (see Sample picture 2) and route the Type A USB 3.0 connector out to the back of the I/O plate via the PCI bracket and plug it on the back USB 3.0 port like picture below
  • Check your BIOS setting to see if you need to "Enable USB Device"

Sample picture 1

Sample picture 2

  • Connect SATA Port

(ZE-C118) Package Contents

  • All-in-1 Card Reader
  • SATA cable (Internal)
  • USB cables (Internal)
  • Screws
  • User Guide

Go back  Top

About nMedia   Contact Us  Legal Disclaimer

Copyright ©  2005-2013 NMEDIA SYSTEM, INC. All Rights Reserved.